Rapid Mixer Granulator
GEM’s Rapid Mixer Granulators operates at a low cost coupled with high productivity and is designed in a manner to achieve perfect mixing & consistent granules.
GEM’s Rapid Mixer Granulators Excellent mixing & close control over the size of granules leads to faster speed in tableting along with superior quality and minimal rejections.
GEM’s Rapid Mixer Granulators meets special needs of tablet manufacturing technology by reducing processing time, homogenous mixing, uniformity of size and above all maintaining improved hygiene compliant to GMP norm
GEM’s Rapid Mixer Granulator Machine consists of various parts ie. Mixing Bowl, Mixing Blades, Granulator, Pneumatic Discharge, Motor, Gear Box, Operating Panel and the Control Panel.
Working Principle of GEM’s Rapid Mixer Granulators :
The working of an Rapid Mixer Granulator machine is based on the two important & essential factors for the mixing systems.
- While Spinning close to the bottom of the mixing bowl, the entire mixture is set in a whirling – rising – tumbling motion by the impeller, ensuring a quick and even distribution of all dry components. This leads to an even wetting of every granule. Large lumps that occurr during wet mixing are broken up, by the strategically placed chopping tool rotating at 1440/ 2880 rpm. The mix can be discharged with the impeller running through an outlet located on the side of the mixing bowl near the bottom.
- Easy accessibility for cleaning is ensured by the low profile. The mixing tool can be easily removed from the drive-shaft, providing an un-obstructed mixing area for easy cleaning.
Standard Processing Duration of GEM’s Rapid Mixer Granulators Machine
- Dry Mixing approx 3 – 5 Mins
- Wet Mixing approx 5 – 10 Mins
- Wet Granulation approx 5 – 10 Mins
- Discharge approx 1-15 Mins
- Above time may vary from material to material.
salient features
- Homogeneous binder distribution.
- Short batch time, reduces cleaning time.
- Option of maximize CIP effectiveness.
- Air purges sealing system for main stirrer shaft & granulator shaft.
- All internal contact parts are under precise control of process & automation.
- A high-speed granulator is inserted horizontally through wall of bowl to assist blending of powder & to break the product to the granules of required size.
- The seal housing and drive shaft may be flushed with cleaning water which is then drained away from the machine through built in drain tubes.
- Available with Auto Control panel and PLC/HMI system as per requirement
- Varying capacity ranging from 10 liters to 1200 Liters.